Shop »
Raumer bolt hanger Rock 10mm – AISI 316L
€ 3,19
incl. 20% VAT zzgl. Versandkosten
- Material: AISI 316L
- Diameter drilling hole: 10mm
- Thickness flap: 4mm
- Size: 35 x 60mm
- Weight: 44 gram
- breaking load∅ 10mm: 26 kN axial / 27 kN radial
- EN standard 959 / UIAA 123 or EN 795
In stock
Description
The Raumer bolt hanger Rock 10mm is a classic hanger. It is made of AISI 316L steel (A4 steel). It can therefore be used anywhere in the Alps. It is best mounted with 10mm A4 steel expansion bolt to prevent galvanic corrosion. Like all Raumer products, this bracket is simply passivated. This means that the protective outer layer has been further strengthened by an acid bath.
The strap complies with the EN 959 standard. This makes it a suitable choice for official climbing areas and climbing frame holders.
In short: this flap is a good choice!
Features Raumer bolt hanger Rock 10mm
- Material: AISI 316L
- Diameter drilling hole: 10mm
- Thickness flap: 4mm
- Size: 35 x 60mm
- Weight: 44 gram
- breaking load∅ 10mm: 26 kN axial / 27 kN radial
- EN standard 959 / UIAA 123 or EN 795
- suitable expansion bolt: Fischer FBN II 10/10 A4
- Technical data sheet – Raumer bolt hanger Rock
Climbing area holders watch out!
Due to the EN 959 standard, the Raumer bolt hanger Rock 10mm is perfectly suited for climbing area construction or climbing area rebolting. Climbing garden owners are legally obliged to use only standardized materials. This product meets all criteria, especially the breaking loads and steel quality.
Would you like to find out more about steel? Then read our technical article “Steel qualities at expansion bolt and glue in bolt“.
Avoid galvanic corrosion
Only A4 steel quick links may be screwed into the Raumer bolt hanger Rock 10mm. Zinc plated screw links lead to galvanic corrosion of the base metal. Therefore, make sure you use the right quality of steel when fitting.
Want to know more about this? Then read our technical article “Galvanic corrosion at expansion bolt and glue in bolt“. Or attend one of our courses or workshops at the bolting.eu Academy.
Not suitable for bolting near the sea!
The Raumer bolt hanger Rock 10mm is not suitable for bolting near the sea. The AISI 316L steel does not meet the required corrosion class. In order to withstand the extreme chemical conditions in the medium to long term, products made of duplex steel are required as a minimum.
Perfect for bolting near the sea:
- glue in bolt made of titanium
- glue in bolt made of HCR steel
- injection mortar for use near the sea
Link tip: More information on the topic expansion bolt at DAV
Additional information
| Weight | 50 g |
|---|---|
| Dimensions | 60 × 40 × 20 cm |
| Marke | Spacer |
| Bohrhakenlasche Dicke | 4mm |
| Bohrhakenlasche Dimension | 10mm – 4 mm thickness |
| Durchmesser | 10mm |
| Stahlqualität | A4 steel / AISI 316(L) |
| weitere Eigenschaften | Made in Italy |
