HCR glue in bolt 12 x 105mm

The Climbing Technology HCR glue in bolt 12 x 105mm is perfect for bolting near the sea. Firstly, the AISI 904L steel is the highest quality steel currently available at expansion bolt and glue in bolt . And secondly, it is extremely resistant to corrosion. Incidentally, the manufacturer’s designation is Climbing Technology Glue-In Anchor HCR.

Climbing Technology HCR drilling materials

CT is one of the very few producers to have HCR steel products in its range. This is because, firstly, manufacturing the products is complex. And secondly, AISI 904L steel is very expensive. As THE bolting expert in the Alps, we also have the matching HCR expansion bolt 12x110mm or HCR bolt hanger 12mm in our store in addition to the HCR glue in bolt.

This means that our customers can also set up great routes in the climbing areas by the sea. Whether you want to set up a climbing route with expansion bolt on the island of Hvar (Croatia). Or you want to set up a climbing route with glue in bolt in Sardinia. At bolting.eu you’ll find everything you need for bolting!

Further material options

The Climbing Technology HCR kehook has its (proud) price. If you want to bolt close to the sea, Fixe PLX – Duplex steel is an affordable alternative. On the one hand, this steel from Fixe Climbing is one quality level below HCR steel. However, PLX steel is also very resistant to corrosion at a much lower price.

Only titanium has better corrosion resistance than HCR steel. We carry the Titanium glue in bolt from Vertical Evolution in our program. This material is the non-plus-ultra when it comes to climbing routes by the sea. HCR and titanium glue in bolt must also be processed with a suitable injection mortar be processed. We recommend the injection mortar Fischer FIS AB 300 T.

Borehole cleaning

When setting glue in bolt, make sure that the drill hole is clean. To ensure that the HCR glue in bolt holds perfectly, you have to work very cleanly. Firstly, clean the hole with a drilling hole blower. Secondly, clean out the drilling dust in at least two passes with a Fischer brush or Fischer hole brush. Thirdly, blow out again. Done!

Extended areas of application

Because the Climbing Technology Glue-In Anchor HCR is extremely corrosion-resistant, it is naturally also suitable for other areas of application. It is particularly useful wherever salty elements are present.

• Sauna and swimming pool areas
• Smoking businesses & food processing businesses
• Production halls with chlorinated vapors
• All fastenings in the vicinity of exhaust systems

Features Climbing Technology HCR glue in bolt 12x105mm

The Bolt has the following features:

• Diameter: 12mm
• Length: 105mm
• Weight 117 gram
• Material: AISI 904L – HCR steel
• breaking load30kN axial / 30kN radial
• EN standard 959 or UIAA 123
• Recommended drill bit: SDS Quattric drill bit or SDS Plus drill bit Pointer with 14mm
• Recommended drilling depth: 115mm

Further links to climbing

Instruction manual Climbing Technology Glue-In Anchor HCR