glue in bolt Austrialpin

The glue in bolt Austrialpin is a good all-round hook. Firstly, it is made of AISI 316L stainless steel. Secondly, it has the EN 959 standard. Thirdly, it is available in three setting lengths.

• 75mm
• 90mm
• 110mm

Features glue in bolt Austrialpin

• EN standard 959: 2007
• Steel: AISI 316L
• available setting lengths: 75mm, 90mm, 110mm
• Weight: 100 gram, 114 gram, 130 gram
• Carabiner eyelet: for 2 carabiners
• Required drilling diameter: 14mm
• recommended adhesive: Fischer FIS AB 300T

Areas of application glue in bolt Austrialpin

The product is a typical all-round glue in bolt. Consequently, it has a wide range of applications.

• Climbing area construction
• Climbing area rebolting
• Climbing area maintenance

Price alternatives

In our store we offer a cheaper alternative to the glue in bolt Austrialpin. Namely the products from Vertical Evolution. This is also available in three dimensions. Firstly in 10x80mm. Secondly in 10x100mm. And thirdly in 12x100mm.

On the one hand, these hooks all comply with the EN 959 standard, but on the other hand they are approx. 10-20% cheaper!

Alternatives for alpine routes

Would you like to set up a climbing route in alpine terrain with glue in bolt ? Then we recommend our 8x80mm Bühler hook. Firstly, it weighs only 47 grams. Secondly, it only needs a 10mm drilling hole. Thirdly, it is also considerably cheaper than the glue in bolt Austrialpin.

Alternatives to bolting near the sea

For bolting near the sea, we recommend the PLX glue in bolt from Fixe Climbing. They are made of Fixe PLX / Duplex steel and have a much better resistance to stress corrosion cracking.

glue in bolt Austrialpin and Rapid links

Sometimes a screw link / quick link is attached to the hook. This makes sense, for example, if you can’t get any further. On the other hand, however, especially if you use the fixed point as a lower off / abseil anchor. To avoid galvanic corrosion, you should only use links made of A4 steel / AISI 316(L).

Are you more interested in the topic of steels? Then read our technical article “Steel qualities at expansion bolt and glue in bolt “.

Processing the Austrialpin adhesive hook correctly

Would you like to bolt a climbing route with the glue in bolt? Then please proceed carefully. Because setting up a climbing route with glue in bolt involves a number of potential errors.

For the glue in bolt Austrialpin you first need a 14mm drilling hole. Use a high-quality SDS drill bit to achieve an exact, round drilling hole. For example, the SDS Quattric drill or SDS Drill Plus Pointer This is the only way to ensure an even coating with the drill bit. injection mortar is ensured.

Secondly, the borehole cleaning is done very carefully. Firstly, the drilling dust with the drilling hole blow out pumb blow out pumb. Secondly, carry out at least two more cleanings with the hole brush or Fischer brush. Thirdly, blow out again and that’s it!

Link tip: to the manufacturer

Weight	N/A
Dimensions	N/A
Marke	Austrialpin
Klebehaken Dimension	12 x 110mm, 12 x 75mm, 12 x 90mm
Einbohr Gewicht	normal
Korrosionsbeständigkeit	high
Routen Beanspruchung	high
Stahlqualität	A4 steel / AISI 316(L)
weitere Eigenschaften	Made in Austria