A2 steel bolting value pack “12mm long” – 50 x 12mm lug and 12 x 100mm bolt

This bolting value pack consists of the following products from Vertical Evolution and bolting.eu. A lightweight, 3mm thick bolt hanger and the matching expansion bolt. Both components are made of A2 steel and are therefore suitable for bolting in the Alps.

Vertical Evolution bolt hanger with 12 mm hole – 3 mm thickness

• made of A2 / AISI 304L stainless steel
• breaking load 25kN radial / 22 kN axial
• 3mm thickness – super light
• Weight 44 gram
• 12mm bore
• “Surface” treatment for increased corrosion protection

12mm expansion bolt A2 steel bolting.eu

• Diameter: 12mm
• Lengths: 100mm
• Material: A2 steel (AISI 304)
• Weight: 104 gram
• Recommended torque: 40 Nm
• Suitable wrench: 19 mm
• suitable drill: 12mm
• Without thorough borehole cleaning, expansion bolt can “go haywire”!

Areas of application – suitable throughout the Alps

These materials are perfect for the entire Alpine region due to their extremely high corrosion resistance. They are therefore perfect for:

• Climbing area construction
• Climbing area rebolting
• Climbing area maintenance

Not suitable for bolting near the sea!

This bolting value pack is NOT suitable for bolting near the sea . If you want to set up a climbing route there with expansion bolt you need a different product! We recommend the Fixe PLX – Duplex steel. This corresponds to the necessary corrosion class to withstand the extreme chemical conditions in the medium to long term.

The following products are also perfect for bolting near the sea:

• Titanium glue in bolt
• HCR steel bolt hanger or HCR steel expansion bolt and HCR steel glue in bolt
• injection mortar for use near the sea

Link tip: In our Bolting Know How section there are many interesting articles about establishing a climbing route.

You can also find many more details on bolting in the 1 x 1 manual at expansion bolt!