lower off with AISI 316L Vertical Evolution ring

The lower off with ring is our absolute top seller. It consists of two 10mm bolt hangera super light chain and a 10mm abseil ring. This stand also has some cool features.

Firstly, it has the EN 795 standard for anchorage devices. Secondly, it has a very competitive price. Thirdly, an ideal weight for alpine routes.

Fourthly, it impresses with its AISI 316L steel quality. This makes the abseil anchor with ring extremely durable. It can be installed anywhere in the Alps.

So you can’t go wrong with abseil anchor!

Features lower off with Ring Vertical Evolution

• Manufacturer: Vertical Evolution
• EN standard 795
• Material: AISI 316L steel
• Breaking loads: 25kN radial and 22kn axial
• Bolt hanger: 10mm bore / 4mm thick
• Chain links: 6mm round steel welded
• Length: approx. 27cm
• Weight: 300 gram
• Ring: 10mm thickness and 32mm inner diameter
• Ring lies flat on the rock – ideal for deflection carabiners

lower off Switch in series with ring!

 

The abseil anchor with ring must be connected “in series”. This means that the two fixed points are only slightly offset horizontally. Vertically, however, they are strongly offset without fully tensioning the chain. Ensure the correct spacing of the expansion bolt of at least 3 x the anchoring depth (tear-out cone expansion bolt!).

Use the appropriate expansion bolt

The lower off with ring from Vertical Evolution is made of AISI 316L steel. Consequently, for the installation of the stand you must use 10mm expansion bolt of A4 steel (AISI 316 / 316L) to install the stand. This avoids galvanic corrosion at expansion bolt. This occurs when fixing to zinc plated expansion bolt. This must be avoided at all costs.

We recommend the expansion bolt from Fischer Befestigungstechnik: the Fischer heavy-duty anchor FBN II 10/10 A4 or FAZ II bolt anchor A4 steel

Are you more interested in this topic?

Then read the technical article“Steel quality at expansion bolt and glue in bolt“. Or sign up for one of our courses at the bolting.eu Academy.

Observe borehole cleaning

The drilling holes for the lower off with ring should be cleaned appropriately. Firstly, use a drilling hole blow out pumb to do this. This removes the drilling dust. Then clean the hole at least once with a hole brush. This also removes the material from the wall of the hole. These two simple steps prevent the expansion bolt from “wandering”. Consequently, the bolt hanger of the abseil anchor with ring cannot become loose and twist.

One of the most popular beaches on Lake Garda!

This climbing anchor is now one of the most popular on Lake Garda. It is also becoming increasingly popular throughout Italy.

If you would like to climb in the south yourself, we recommend the sport climbing guides from our online store TMMS Verlag.

There is a MEGA selection of topos from all over Italy!

Weight	300 g
Dimensions	15 × 4 × 2 cm
Marke	Vertical Evolution
Bohrhakenlasche Dimension	10mm – 4 mm thickness
Routen Beanspruchung	high
Einbohr Gewicht	normal
Stahlqualität	A4 steel / AISI 316(L)
Einsatzgebiete	Abseiling slopes, Alpine climbing routes, Alpine region, bolting, Speleology, Speleology