Bolt hanger with chain AISI 316L

We are the specialist when it comes to bolting a climbing route. That’s why you can only find many special products from us. Such as the bolt hanger with chain made of AISI 316L steel.

This smartly manufactured station wagon is intended for the following purposes.

Firstly, for stand renovation. If you already have a very good fixed point, you can immediately create a new one with the combi and a quick link lower off . The cool thing about it. You can mount the strap or chain both above and below!

A carabiner can also be attached directly through the twisted flap.

Secondly, this product can be used in pairs as an abseiling point. Simply connect the ends with a quick link and the abseil anchor is ready. This can be useful if the abseil point needs to be some distance away from the rock face due to a ledge or other obstacle.

Features bolt hanger with chain

• Manufacturer: Vertical Evolution
• Material: 6mm steel wire or 3mm sheet steel
• Steel quality: AISI 316L
• Length: 24cm
• Weight: 161 gram
• Strap conforms to EN 795 and breaking load 25kN
• Matching accessories: AISI 316L quick links
• Do not mix with zinc plated components!

Use AISI 316L quick links!

Avoid the phenomenon of “galvanic corrosion”! Stainless steel components must not be used with zinc plated materials. I.e. no zinc plated quick links may be used for the bolt hanger with AISI 316L chain.

If you are not familiar with this, read our technical article in our bolting blog: Galvanic corrosion in expansion bolt