abseil anchor with ring 90°

Our abseil anchor with ring 90° is a smart climbing anchor. This is because the bolt hanger are bent downwards and therefore the abseil ring is at 90° to the rock. This means that the abseil ring is completely exposed and allows the rope to be pulled off without friction.

This saves you the 2nd abseil ring and also the higher purchase costs!

Consequently, this stand is perfect for anyone who wants to set up an abseil route. Furthermore, this product is perfect for climbing areas where you deliberately only want to rethread. In other words, the use of carabiners is not even considered.

Properties abseil anchor with ring 90°

• Manufacturer: Vertical Evolution
• EN standard 795
• Material: AISI 316L steel
• Breaking loads: 25kN radial and 22kn axial
• Infinity bolt hanger: 10mm bore / 4mm thick
• Chain links: 6mm round steel welded
• Length: approx. 27cm
• Weight: 300 gram
• Ring: 10mm thickness and 32mm inner diameter
• Ring 90° to the rock – ideal for abseiling point

Saves a lot of money

Thanks to the smart design of the abseil anchor with 90° ring, you can save a lot of money. Because there is no need for a 2nd ring. This means you can get a fully-fledged rappelling system for a good €2 cheaper.

This is made possible by the Infinity bolt hanger. It is designed so that it points downwards and the ring is at 90° to the rock. The two 6 mm chain links are also adapted accordingly. A really smart product!

Attachment

The abseil anchor with 90° ring should be installed with the bolt hanger directly above each other or only slightly offset!

abseil anchor with ring 90° – Applications

This climbing anchor is intended for two applications.

Firstly, as abseil anchor. As already mentioned, the ring is at 90° to the rock. This means that it is exposed and is therefore ideal for rappelling or pulling off the rope.

Secondly, this belay station is intended for use at lower off if you are deliberately NOT planning to use a redirection carabiner. In other words, if you absolutely want to be rethreaded at the belay.

Link Tip

Our recommendation for all those who want to work on abseil anchor with Ring 90° or systematically develop a climbing area: The Tyrolean government’s climbing area manual.