screw link 8mm zinc plated

The screw link 8mm zinc plated is one of our bestsellers. And for good reason. Firstly, the price is absolutely top class. Secondly, the product complies with EN standard 12275 and EN standard 362. And thirdly, the breaking load is very high at 25 kN.

Properties screw link 8mm zinc plated

• Material: zinc plated steel
• Diameter: 8mm
• Inner radius: 10mm
• Breaking loads: 25kN closed / 10kN cross-loading
• EN standard 12275 or EN standard 362
• Opening width: 11mm
• Weight: 78 gram

Areas of application screw link 8mm zinc plated

The product is very popular in many areas, such as:

• to lower off-climbing anchors for rappelling
• in glue in bolt for retreating / rappelling
• in expansion bolt for retreating / rappelling
• as an abseiling point in cave exploration
• for the fixed connection of gear for work at heights
• in the field of mountain rescue and cave rescue
• Fixed connection of ascender with webbing slings / stepladders

Watch out for galvanic corrosion!

If you install a screw link 8mm zinc plated, you must pay attention to galvanic corrosion! This means that you must not hang this zinc-plated steel product in a stainless steel fixed point. This will lead to corrosion of the quick link over time.

Please always combine zinc-plated components with other zinc-plated components such as bolt hanger. If the fixed point is made of stainless steel, you must use a link with the same steel quality. This is the only way to ensure long-term durability. I.e. over many years.

If you are interested in this topic, read our technical article: Steel qualities at expansion bolt and glue in bolt

Problematic DIY store screw links

Unfortunately, non-standardized products from the DIY market keep turning up at abseiling points. Watch out! These can be life-threatening. The breaking loads are often only a few hundred kilos. Consequently, these links do not meet any standards.

Only use standardized products such as the screw link 8mm zinc plated. They are clearly recognizable by the markings on the side. Only standardized material should be used in the above-mentioned areas.

screw link Note types!

There are many different models of quick links. The oval shape of the screw link 8mm zinc plated is the classic one. It is mainly used for vertical force transmission of narrow ropes or steel components. This is because the inner radius is only 10mm. For example, from a glue in bolt to an 8mm rope. Or from the metal ring of a work at heights harness to a webbing sling or energy absorber.

Depending on the intended use, these shapes may also be more suitable:

• D-shaped: for attaching several securing points as with the work at heights
• Triangular: to transfer loads from a small attachment point to a slackline, for example
• rectangular: for lifting work such as connecting sling to sling
• pear-shaped: on the one hand where large screw openings are required or wide components are to be suspended on the other hand
• oval: classic design for all vertical force transmissions

Practice tip

Anyone who uses a screw link 8mm zinc plated regularly should maintain it. Yes, exactly! W A R T E N! This can be the case with work at heights, for example. Here you have to keep hanging the link in and out of the harness or rigging plate. This means you are well advised to lubricate it with a climbing equipment care oil. This means that the screw lock can still be operated easily!

Link tip: to the manufacturer