abseil ring without weld seam

Our abseil ring without weld seam is made of AISI 316 / A4 steel. It is therefore a highly corrosion-resistant product. It is ideal for renovating belay stations or upgrading existing ones. Due to its steel quality, it should always be fitted with AISI 316 / A4 steel screw link- quick link.

The ring is round with a 7.2mm cross-section. The inner diameter is 45mm, making it very large.

abseil ring without weld seam – Properties

• Material: AISI 316L / A4 steel
• Diameter ring: 7.3mm
• Inner diameter: 45mm
• Ideal for stand renovation
• Ideal for upgrading belay stations
• breaking loadn/a
• No weld seam – no stress corrosion cracking possible!
• Manufacturer: Austrialpin

abseil ring without weld seam – Areas of application

This abseil ring is intended for the following three areas of application. Firstly, for refurbishing climbing anchors. Secondly, for retrofitting lower offs or abseiling points. And thirdly, for situations where you want to have a ring as an anchor point for loads.

Refurbishing climbing anchors

The abseil ring without weld seam is perfect for renovating belay stations. But please bear this in mind. Firstly, you also need a suitable stainless steel chain. And secondly, the right quick links. After all, the purpose of any renovation should be for the ring to protrude 90° from the rock. This means that the integration is both rope-friendly and functional. Because then there is no more rope jamming!

Retrofitting lower off or abseiling points

The abseil ring without weld seam is ideal for retrofitting abseiling points in combination with a quick link. As already mentioned above. Attachment with a quick link allows the ring to protrude 90° from the rock. This means that the rope is easy to pull off and does not pinch.

Suspension for loads

The abseil ring 10mm without weld seam is perfect for attaching larger components. The 45mm inner diameter allows large carabiners to be attached, for example. But also “slips can be hooked in here. In short. If you want to change from a very small suspension system such as a chain to large components, the ring is the perfect choice. Although the breaking load is not specified for this product, it is certainly sufficient for all alpine applications.

Link tip abseil ring without weld seam

Anyone threading a abseil ring directly into a webbing sling or cordalette should definitely read the tips from bergundsteigen on the Standtplatz universal method!