A4 steel bolting value pack Austrialpin – 50 x 12mm lug and 12 x 86mm bolt

This bolting value pack consists of the following products from Austrialpin and Fischer Befestigungstechnik. One 12mm bolt hanger and the matching expansion bolt. Both components are made of A4 steel and are therefore perfect for bolting in the Alps.

12mm bolt hanger Austrialpin

• only 42 grams
• 3mm thick
• Good all-round strap
• Perfect for all terrains
• AISI 316L steel
• EN standard 959 / UIAA 123

Fischer FBN II 12/10 A4 steel expansion bolt

• Diameter: 12mm
• Dowel length: 86mm
• Material: highly corrosion-resistant A4 steel
• Required wrench: 12mm = 19 mm
• Required torque: 12mm = 60 Nm
• Weight: 102 gram

Areas of application – suitable throughout the Alps

These materials are perfect for the entire Alpine region due to their extremely high corrosion resistance. They are therefore perfect for:

• Climbing area construction
• Climbing area rebolting
• Climbing area maintenance

Not suitable for bolting near the sea!

This bolting value pack is NOT suitable for bolting near the sea . If you want to set up a climbing route there with expansion bolt you need a different product! We recommend the Fixe PLX – Duplex steel. This corresponds to the necessary corrosion class to withstand the extreme chemical conditions in the medium to long term.

The following products are also perfect for bolting near the sea:

• Titanium glue in bolt
• HCR steel bolt hanger or HCR steel expansion bolt and HCR steel glue in bolt
• injection mortar for use near the sea

Link tip: In our Bolting Know How section there are many interesting articles about establishing a climbing route.

You can also find many more details on bolting in the 1 x 1 manual at expansion bolt!