expansion bolt 10mm zinc plated

The bolting.eu expansion bolt 10mm zinc plated fits our zinc plated 10mm bolt hanger. The bolting.eu product is the right low-cost solution for temporary securing points and small bolting budgets.

Firstly, the bolt is made of zinc plated steel. If you use zinc-plated lugs, you need exactly this expansion bolt. Consequently, it fits all our zinc plated bolt hanger.

Difference 10mm expansion bolt zinc plated – A2 steel bolt

The zinc plated version has the following differences to the A2 steel model.

• it has a completely different – lower steel quality
• significantly cheaper
• the model is only suitable for zinc plated bolt hanger

Correct drill hole cleaning at expansion bolt 10mm zinc plated

When settingexpansion bolt , we recommend that everyone simply clean the drill dust. On the one hand, this can be done with a drilling hole blow out pumb can be used. On the other hand with a hole brush. For example, with the Fischer brush set or the Fischer hole brush. If you want to work cleanly, use both tools once each.

Galvanic corrosion

Avoid installing stainless steel components with the bolting.eu expansion bolt made of galvanized steel. This is because combining stainless and non-precious components results in galvanic corrosion.

Therefore, make sure that the bolts are not mixed with bolt hangernuts or washers made of stainless steel (A2 steel, A4 steel, AISI 316L). Furthermore, stainless steel screw links-rapid links should never be added.

Properties expansion bolt 10mm zinc plated

• Diameter: 10mm
• Dowel length: 90mm
• Material: corrosion-resistant steel (galvanized zinc plated)
• required wrench: 17 mm
• Required torque: 25 Nm
• Weight: 75 gram

Not suitable for near the sea

The bolting.eu expansion bolt 10mm zinc plated is made of zinc plated steel. Consequently, it is not suitable for bolting near the sea. This is because this steel quality does not have anywhere near the required corrosion resistance.

For use near the sea, we recommend the bolts and lugs from Fixe Climbing. The Fixe PLX – Duplex steel has the corresponding features such as a two-phase structure and resistance to pitting and stress corrosion cracking.

The HCR steel parts from Climbing Technology have an even higher corrosion resistance. You can find HCR expansion bolt and HCR bolt hanger in our store.

Further information on expansion bolt

If you would like to find out more about the expansion bolt 10mm zinc plated, read our technical articles.

• What do expansion bolt think?
• Steel qualities at expansion bolt and glue in bolt

Link Tip

Report on the standard testing of expansion bolt in mountainous areas.