Canyoning glue in bolt 10 x 100mm AISI 316L

The canyoning glue in bolt 10 x 100mm AISI 316L is designed for canyoning belay stations. Due to its design, it is also used by climbers as an abseil point. This hook is specially designed for somewhat looser rock such as limestone and conglomerate. The anchor points should be set at an appropriate depth here.

Due to its shape, this product offers a perfect belay point in gorges. This is because the ring-shaped attachment point at the deepest point offers space for several carabiners. The hook is also made of highly corrosion-resistant AISI 316L steel. This is particularly important in a permanently damp environment. Are you thinking of renovating a canyoning route? Then this product is the right choice for you!

Features Canyoning glue in bolt 10 x 100mm

• Material: AISI 316L steel
• Weight: 182 gram
• Shaft length of both ends: 10 x 100mm
• Required drill diameter: 10mm to 12mm
• Manufacturer: Vertical Evolution
• Fixation: only possible with injection mortar

This hook cannot be glued with glass mortar cartridges. This is because it cannot be hammered in under rotation!

Borehole cleaning canyoning glue in bolt 10 x 100mm

If you want to bolt a climbing route with a bolt, you should proceed carefully. This is because setting up a climbing route with glue in bolt harbors several potential sources of error.

Firstly, start with a high-quality SDS drill bit to obtain a round drilling hole. For example, the Fischer Quattric or Pointer Plus. This is the only way to achieve an even contact with the injection mortar.

Secondly, the borehole cleaning process is extremely precise. Firstly, the drilling dust with the drilling hole blow out pumb blown out. Secondly, two more cleaning passes with the hole brush or Fischer brush. Thirdly, blow out again and that’s it!

Galvanic corrosion

Galvanic corrosion can also occur with canyoning glue in bolt 10 x 100mm. Therefore, never use zinc plated screw link – quick link. As a “poorer” metal, it will inevitably break down over time. If a quick link is to be permanently installed, it must be made of A4 steel.

Bolting near the sea

The canyoning glue in bolt 10 x 100mm cannot be used near the sea. For this we clearly recommend the products from Fixe Climbing. Because the Fixe PLX – Duplex steel products consist of the right steel.

We also stock products made of HCR steel from Climbing Technology and titanium glue in bolt.

If you would like to know more about this, read our article: “Steel qualities at expansion bolt and glue in bolt”

Link Tip: expansion bolt DAV brochure