Bolting value pack HCR – 20 x 12mm lug and 12 x 105mm bolt

The Climbing Technology HCR bolting pack is perfect for bolting near the sea. It consists of 20 pieces of 12mm expansion bolt or 12mm bolt hanger. The set features AISI 904L steel, currently the highest steel quality at expansion bolt and glue in bolt . And secondly, it is extremely corrosion-resistant.

HCR drilling pack

CT is one of the very few producers with HCR steel products in its range. This is because, firstly, manufacturing the products is complex. And secondly, AISI 904L steel is very expensive. As THE bolting expert in the Alpine region, we naturally also have an inexpensive HCR bolting pack in our range. It consists of the 12mm HCR expansion bolt or the matching 12mm HCR bolt hanger.

This means that our customers can also set up great routes in the climbing areas by the sea. Whether you want to set up a climbing route with expansion bolt on the island of Hvar (Croatia). Or you want to set up a climbing route with glue in bolt in Sardinia. At bolting.eu you’ll find everything you need for bolting!

Borehole cleaning

When setting expansion bolt, make sure that the drill hole is clean. Firstly, clean the hole with a drilling hole blower. Secondly, clean out the drilling dust with a Fischer brush or Fischer hole brush. Thirdly, blow out again. Done!

Further material options

The Climbing Technology HCR drilling pack has its (proud) price. If you want to bolting near the sea, Fixe PLX – Duplex steel is an affordable alternative. On the one hand, this steel from Fixe Climbing is one quality level below HCR steel. However, PLX steel is also very resistant to corrosion at a much lower price.

Only titanium has better corrosion resistance than HCR steel. Our range includes titanium glue in bolt from Vertical Evolution. This material is the non-plus-ultra when it comes to climbing routes by the sea. HCR and titanium glue in bolt must also be processed with a suitable injection mortar be processed. We recommend the injection mortar Fischer FIS AB 300 T.

Extended areas of application

Because the HCR single-bore pack is extremely corrosion-resistant, it is naturally also suitable for other areas of application. It is particularly useful wherever saline elements are present.

• Sauna and swimming pool areas
• Smoking businesses & food processing businesses
• Production halls with chlorinated vapors
• All fastenings in the vicinity of exhaust systems

Properties HCR drill-in pack

The Bolt has the following features:

• Diameter: 12mm
• Length: 110mm
• Weight 107 gram
• Material: AISI 904L – HCR steel
• EN standard 959
• Recommended torque for the CT HCR expansion bolt 12mm : 50 kN
• recommended drill: Fischer Quattric Plus IV 12mm
• Recommended drilling depth: 120mm

The flap has the following properties:

• Bore diameter: 12mm
• breaking load 25kN radial / 25kN axial
• Material: AISI 904L – HCR steel
• EN standard 959
• Weight: 47 gram
• Total weight HCR drilling pack: 3.20 kg

Further links to the HCR drilling pack:

Instructions for use