Bolt hanger with double ring

This bolt hanger with double ring is made by Raumer. It is intended for setting up abseil slopes or abseil points. The product consists of a 4mm thick Raumer Rock lanyard with a 10mm hole. The other consists of two 10mm rings with a welded seam.

This bracket is intended for installation in pairs. I.e. slightly offset one above the other to create redundancy.

If you want to set up an abseiling point or abseiling slope, this is the right lashing for you!

Features bolt hanger with double ring

• Manufacturer: Raumer
• Material: AISI 316L stainless steel
• Weight: 208 gram
• Lug: Raumer Rock 4mm with 10mm hole
• Rings: 10mm thick and 32mm inner diameter
• Ideal for abseiling slopes and abseiling points
• Mounting in pairs and in series
• suitable expansion bolt: Fischer FBN II and Fischer FAZ

Only install with A4 steel bolts!

These bolt hangers with double ring are made of AISI 316L steel or A4 steel. Consequently, they may only be installed with expansion bolt of the same steel quality. The designations don’t mean anything to you? Then read our article“Steel qualities at expansion bolt and glue in bolt “.

This is because mixing components of different steel qualities results in galvanic corrosion.