abseil ring 10mm stainless steel

Our abseil ring 10mm stainless steel is made of AISI 316 / A4 steel. It is therefore a highly corrosion-resistant product. It is ideal for refurbishing belay stations or upgrading existing ones. Due to its steel quality, it should always be fitted with AISI 316 / A4 steel screw link- quick link.

The ring has an inner diameter of 32mm and a weld seam. The cross-section of the ring is absolutely round with a diameter of 10 mm.

abseil ring 10mm stainless steel – Properties

• Manufacturer: Raumer
• Material: AISI 316L / A4 steel
• Diameter: 10mm
• Inner diameter: 32mm
• Ideal for stand renovation
• Ideal for upgrading belay stations
• breaking load 40kN / 4,000kg
• with weld seam
• 7mm Rapid link: CE / EN 12275 standardized Maillon Rapid AISI 316L / breaking load 40kN
• 8mm Rapid link: CE / EN 12275 standardized Kong quick link AISI 304 / breaking load 1.400kg

abseil ring 10mm stainless steel – Areas of application

This abseil ring is intended for the following three areas of application. Firstly, for refurbishing climbing anchors. Secondly, for retrofitting lower offs or abseiling points. And thirdly, for situations where you want to have a ring as an anchor point for loads.

Refurbishing climbing anchors

The abseil ring 10mm stainless steel is perfect for renovating belay stations. But please bear this in mind. Firstly, you also need a suitable stainless steel chain. And secondly, the right quick links. After all, the purpose of any renovation should be for the ring to protrude 90° from the rock. This means that the integration is both rope-friendly and functional. Because then there is no more rope jamming!

Retrofitting lower off or abseiling points

The abseil ring 10mm stainless steel in combination with a quick link is ideal for retrofitting abseiling points. As already mentioned above. Attachment with a quick link allows the ring to protrude 90° from the rock. This means easy removal of the rope and no jamming.

abseil ring 10mm stainless steel – Suspension for loads

The abseil ring is perfect for attaching larger components. The 32mm inner diameter allows large carabiners to be attached, for example. But also “slips can be hooked in here. In short. The ring is the perfect choice for anyone who wants to transfer from a very small suspension such as a chain to large components. The breaking load of 35kN guarantees a high load capacity!

Link tip abseil ring 10mm stainless steel

Anyone threading a abseil ring directly into a webbing sling or cordalette should definitely read the tips from bergundsteigen on the Standtplatz universal method!

Weight	50 g
Dimensions	4,2 × 4,2 × 1 cm
Marke	Spacer
Stahlqualität	A4 steel / AISI 316(L)
Einbohrmaterial Kategorie	lower off & climbing anchors
Korrosionsbeständigkeit	high
Routen Beanspruchung	Very high
weitere Eigenschaften	bolting.eu recommendation, Made in Italy
Abseilring	abseil ring and 8mm Rapid link, Absil ring and 7mm Rapid link, only abseil ring