climbing anchor Inox with carabiner

Our climbing anchor Inox with carabiner is an extremely inexpensive lower off. The great price is based on the smart design.

Firstly, this product consists of standardized bolt hanger for 10mm expansion bolt. Secondly, long, 6mm thick chain links. And thirdly, a 10mm thick ring with an anti-theft carabiner.

All materials are made of high-quality AISI 316L steel. In short. Lots of quality for a low price!

Features climbing anchor Inox with carabiner

• Material: AISI 316L steel
• Lugs: 4mm thick with 10mm hole
• Chain links: made from 6mm steel wire
• Ring: 10mm thick and 32mm inner diameter
• Carabiner: highly abrasion-resistant carabiner with splint
• Ideal for climbing area construction or climbing area rebolting

Fully equipped

The climbing anchor Inox with carabiner has everything a good lower off needs. On the one hand, two lugs or a fixed chain for series connection. And on the other hand a deflection carabiner that is secured with a splint in a ring.

Firstly, the carabiner is positioned at 90° to the rock. This means that the rope is always perfectly exposed. And secondly, it cannot be stolen. The splint acts as an anti-theft device. The ring also makes it possible to replace the carabiner at a later date. A new one can therefore be attached at any time!

climbing anchor Inox with carabiner = AISI 316L steel

This lower off is therefore made of high-quality AISI 316L steel. This means that

Firstly, it has high corrosion resistance. It can be used anywhere in the Alpine region. Secondly, it must not be attached with zinc plated expansion bolt. This causes galvanic corrosion.

Not familiar with this? Then read our technical article in our bolting blog: Galvanic corrosion in expansion bolt

There are also many interesting articles waiting for you!

Link Tip

Interesting report on a climbing accident involving a lower off with a sharp-edged carabiner.