glue in bolt with 2 rings exposed

Our glue in bolt with 2 rings exposed is a great thing. Thanks to the special design, both rings protrude from the rock. This means that the climbing rope run perfectly free here. There can be no jamming or “incorrect” insertion of the rope.

This is achieved by the triangular shape of the carabiner eye. The upper leg is glued horizontally into the rock. This means that the hole on the side of the rock channel for the eyelet must also be drilled horizontally.

The glue in bolt with 2 exposed rings has a dimension of 10 x 100mm. It is made of double passivated AISI 316L stainless steel. As a result, it is extremely durable. In addition, the shaft has a rolled thread for a perfect form fit.

In short. If you’re looking for the perfect abseiling slope glue in bolt, you’ve found it here!

Features glue in bolt with ring exposed

• Manufacturer: Vertical Evolution
• Material: AISI 316L stainless steel
• Weight: 328 gram
• breaking load: 25kN
• Treatment: double passivated = extra thick anti-corrosion layer
• Dimension glue in bolt: 10 x 100m
• Dimension rings: 10mm thickness / 30mm inner diameter
• TIG welding process

The hook eye makes it possible

Our glue in bolt with exposed ring is obviously produced differently to classic composite hooks. This is because a triangular hook eye is welded onto the shank. This means that the hook eye is angled downwards and the 1st ring automatically remains at the lowest point.

This means that it is also practically at 90° to the rock and the 2nd ring is also exposed at some distance from the rock.

glue in bolt Install correctly with 2 rings exposed

As with all glue in bolt, the hook eye on the side of the rock must be glued into a small channel. This gives each composite hook significantly more stability axially.

Pay particular attention to drilling the channel horizontally and wide enough. Then clean very cleanly.

You can find out more about this topic in our article “Setglue in bolt “.

breaking load 25kN

We can reassure anyone who has concerns about the breaking load due to the welding. The glue in bolt with 2 exposed rings has a breaking load of a whopping 25kN.

This is achieved using a high-quality TIG welding process.

glue in bolt with ring – Longlife

The double passivation on this composite hook or ring provides extra corrosion protection. This protective coating gives this hook an extremely long service life.

With us, you get this “Longlife” feature for free! Unlike other manufacturers, we do not charge extra for this sustainable quality feature.

 

Weight	328 g
Dimensions	13 × 4 × 3 cm
Marke	Vertical Evolution
Stahlqualität	A4 steel / AISI 316(L)
Klebehaken Dimension	10 x 100mm
Einbohrmaterial Kategorie	glue in bolt, lower off & climbing anchors
Einbohr Gewicht	heavy
Korrosionsbeständigkeit	Very high